DIY No-Sew Chevron Crib Skirt

I loved this crib set from Carousel Designs, but there was no way I was going to pay $500 for one crib set.  I even looked for similar pieces sold separately online but didn’t have much luck.  The cheapest navy chevron crib skirt I could find was $40, so I decided to use the crib set as my inspiration, but make my own version. 

To make my own no-sew crib skirt, I had to first measure the width of the sides and front of the crib, and the length from the mattress frame to the bottom of the lower panel on the front of the crib.

I purchased three yards of navy chevron fabric from Hobby Lobby. Remember, I had to make crib skirts for two cribs, not just one crib. They have the navy chevron in both thin cotton and thick upholstery fabric. I chose the thicker fabric, so I would have a nice clean and crisp crib skirt. The fabric was $7.99 a yard, but I used a 40% off coupon found in the weekly ad (find the ad online for a printable coupon).

I decided to make three pieces for one crib skirt, one piece for the front and one piece for each of the sides, rather than one long crib skirt. This gave me cleaner lines when attaching the crib skirt to the crib. I chose not to make a piece for the back of the crib, since no one would see the back of the crib.

Making the three pieces was pretty easy. I just used my crib measurements and added a half inch for a hem. Then I cut my fabric according to my measurements, ironed a hem on all four sides of each piece of fabric, and using Heat N Bond adhesive tape I “no-sewed” the hems. When cutting the fabric be sure that the chevron lines up on both sides of the crib and the front, so it looks like one piece of fabric.

When I began cutting my fabric for the front of the crib, I ran into a dilemma. Because I wanted the chevron pattern going straight across and not up and down, I only had 44 inches of fabric to work with and the width of my crib was longer than 44 inches. In order to make it look like one piece of fabric in the front of the crib, I had to use two pieces of fabric, align the chevron pattern of both pieces of fabric up perfectly, and then attach both pieces together using my no sew adhesive tape. In the end it worked, because you can’t tell I used two pieces of fabric in the front.

Once I had three pieces of “no-sewed” crib skirts, I attached each piece to the crib by using Velcro tape I had in my craft closet. I cut pieces of the tape, attached one side of the Velcro to the part of the crib mattress frame and the other part to the back of my no-sew crib skirts. I used a piece of Velcro tape about every three bars on the crib. If the adhesive part of the Velcro is not sticking very well, hot glue does wonders.  

In the end, I am happy with my finished product. The crib skirt cost me around $15 for each crib after supplies, and it only took a little bit of measuring, cutting and ironing.

I'm linking up at:
The Thrifty Home
Chic on a Shoestring Decorating
Remodelaholic
The Shabby Nest
The Cottage Market
The Girl Creative
The Crafted Sparrow
A Creative Princess
Handy Man Crafty Woman
Someday Crafts
Not Just a Housewife
Elizabeth and Co.
Lines Across My Face
Domestically Speaking
DIY Show Off
Nifty Thrifty Things
Create With Joy
Flour Me With Love
Boogie Board Cottage

Coastal Charm